Your attic is much more than just a storage space. It is a part of your overall roof system, and in order to get the most from your roof you will want to make sure that your attic is properly ventilated. Not only can proper attic ventilation keep your energy costs down, it will help your roof last as long as possible.
Why Ventilation Matters
Proper ventilation necessitates that fresh air is able to find its way in the attic space, while allowing stale air to get out. This is accomplished through the placement of ventilation near the bottom of the attic space at the soffits or eaves (intake), and at the top peak(s), or ridge(s), of your attic space (exhaust). This will permit the circulation of air, which will keep the attic space at a uniform temperature and humidity level, regardless of the season. In order for attic ventilation to work effectively, however, the ventilation system must have balanced intake and exhaust.
Balanced ventilation is achieved when intake and exhaust allow for same amount of airflow, because the natural forces of air pressure create a push-pull effect around your roof. Without proper exhaust, hot air cannot escape. Without proper intake, air will only circulate across the top of the attic space, leaving stagnant air at the bottom of the attic. Circulation is also restricted when there are vents on only one side of the attic, similar to the effect one would get if only opening windows on one side of a house on a breezy day.
Attic Ventilation Helps Keep Cooling Costs Low
Since hot air rises, warm air naturally makes its way into an attic, and it will remain there if the space is poorly ventilated. On a 90° day, attic temperatures can reach 140° or higher, and this unventilated air can work its way back into lower level living spaces and cause AC units, fans, and other energy consuming appliances to work harder. This is no small thing when you consider that cooling accounts for 6% of total utility costs in the average home (http://energy.gov/articles/energy-saver-101-infographic-home-cooling). With proper ventilation, however, this warm air find its way up and out of the home rather than staying trapped.
Preventing Cold-Weather Condensation
Winter weather can also presents challenges for attics. As temperatures plummet, the warm, moist air that rises from living spaces into an improperly ventilated attic will condense on cold surfaces. Over time this moisture can build and cause the roof decking to buckle, swell, and rot, making it unable to hold nails securely and reduce its load capacity. Condensation also creates optimal conditions for mold and mildew growth, which affects allergy sufferers and has a negative impact on indoor air quality.
Lowering the Likelihood of Ice Dams
During the winter, heat trapped in the attic causes snow on a roof to melt and slide downward toward the eaves and gutters, which are not exposed to the heat from within the attic. When the snow melt reaches these cold areas it can refreeze, creating a buildup that will dam additional snowmelt, which then refreezes. This continual buildup of ice is called an ice dam. This is dangerous because water expands when it freezes, and the expansion of pooled water refreezing can push roofing materials apart and allow water to infiltrate the roof system. If left unchecked, this infiltration can soak through roof decking, and may even make its way inside living spaces to ruin paint, mark ceilings, and stain walls. A properly ventilated attic space, however, will exhaust the heat, remain uniformly cool, and not allow this harmful freeze-thaw cycle to take hold.
What Can Be Done?
Have no fear – just because your attic is not properly ventilated does not mean that you need to replace your roof system. Proper ventilation is a simple but effective way to protect your investment and your wallet, and there are ventilation options for all roofs that will prevent your home from encountering any of the above mentioned issues. To discover which venting solution is best for your home reach out to a roofing professional and request an inspection. Many roofing professionals will offer to inspect your roof system at no charge.
Designed with external baffles which maximize airflow across the underside of roof sheathing, the CertainTeed® Ridge Vent works year-round to efficiently and effectively ventilate an attic space.
Less than an inch in height, and molded from high-impact copolymer, it’s slim profile blends for visual appeal while permitting shingle capping over the ridge for a uniform, finished roof aesthetic.
CertainTeed Ridge Vents, combined with sufficient intake ventilation such as soffit vents or CertainTeed Intake Vent, are the most efficient and effective systems you can install.
TECHNICAL INFORMATIONMade with an internal weather filter
Wind driven rain resistant to 110 MPH
Each vent has 18 sq. in. of net free area per linear foot
Accommodates roof pitches from 3/12 to 16/12
Available with and without nails
RoofRunner™ is a lightweight, synthetic polymer-based underlayment that outperforms felt and outclasses other synthetics. Designed for use on roof decks as a water-resistant layer beneath asphalt roofing shingles, this scrim-reinforced underlayment includes a special top surface treatment that provides excellent slip resistance, even when wet. It's large roll size - 4 feet wide x 250 feet long - helps speed application.
INSTALLATIONApplying a roof system correctly is essential to the warranty and performance of the roof. Please refer to the installation instructions for complete details.
WARRANTY DETAILSWhen RoofRunner™ is used in conjunction with a CertainTeed roofing product, RoofRunner will take on the same warranty period as the shingle above it. When RoofRunner is used with a non-CertainTeed product, the limited warranty period will be 10 years.